SIMCO HOLDINGS LIMITED · HONGKONG. SHANDONG. TIANJIN
WhatsApp

PPAZM Prepainted Aluminium-Zinc-Magnesium Steel Coil

Prepainted aluminium-zinc-magnesium steel coil for coastal and architectural use

PPAZM Prepainted Aluminium-Zinc-Magnesium Steel Coil — SIMCO steel coil supply
01 / DEFINITION

Product overview

PPAZM is prepainted steel coil using an aluminium-zinc-magnesium coated substrate. It combines a metallic alloy coating with a factory-applied paint system.

The substrate coating and paint system perform different roles: the metallic layer provides corrosion protection, while the primer and topcoat provide the selected colour, finish and additional surface protection.

02 / STANDARDS & GRADES

Standards & grades

Standard systemGrades supplied
JIS G3323 (substrate family)SMGCC series — confirmed against the producing line
ASTM A1046Grade 33 to Grade 80 — confirmed against the producing line
EN 10346DX51D, S220GD to S550GD — confirmed against the producing line
AS 1397G250, G300, G350, G450, G550 — selected structural grades, subject to confirmation

Grade availability is confirmed against the producing mill before quotation. Please state the required standard when sending your RFQ.

03 / DIMENSIONS & PARAMETERS

Dimensions & parameters

ParameterRange / valueConfirmed before ordering
Thickness0.20–1.20 mmDedicated production range
Mother coil width600–1250 mmConfirmed per order
Slit coilSlitting available down to 20 mmConfirmed per order
Metallic coatingAluminium-zinc-magnesium alloy; coating mass confirmed per orderState required coating mass
Paint systemRMP (PE) / SMP / HDP / PVDFSubject to availability
Film thicknessConfirmed according to paint system and applicationTopcoat and backcoat
ColourRAL reference or approved physical sampleConfirmed per order
Coil weight / ID3–14 t / 508 or 610 mmConfirmed per order
Minimum order quantity25 tonnes per size · 100 tonnes per orderConfirmed against mill requirements
Loading portTianjin / QingdaoSubject to order

Minimum order quantity: 25 tonnes per size · 100 tonnes per order. Final specification and availability are confirmed against the selected mill before order acceptance.

04 / TYPICAL APPLICATIONS

Typical applications

01

Coastal & marine-environment roofing

Buildings within salt-spray zones where standard PPGL may show premature cut-edge creep.

02

Fastener-intensive roofs

Profiles with exposed screws, where the coating supports galvanic protection around drilled holes.

03

High-humidity & industrial envelopes

Chemical plants, coastal ports, desalination facilities and paper mills.

04

Long-warranty architectural projects

Premium commercial and public buildings specifying extended corrosion performance with HDP or PVDF systems.

05

Coastal insulated panels

Exterior skins for high-specification sandwich panels in humid climates.

05 / PRODUCT FAQ

Product FAQ highlights

01

PPAZM versus PPGL: where the substrate difference matters.

PPAZM uses an aluminium-zinc-magnesium substrate developed for cut-edge and fastener protection in coastal or high-humidity work; PPGL remains the standard choice for general exposed roofing.

02

Dedicated production range and width requirements.

The prepainted range runs 0.20–1.20 mm on mother coil 600–1250 mm. Requirements outside that band are reviewed as a separate sourcing request.

03

Metallic coating and paint system selection.

Metallic coating mass and paint system are specified together with the exposure and forming route; HDP or PVDF is usual for long-life facade work.

04

Information required for a PPAZM quotation.

Send thickness, width, substrate coating mass, paint system, top and back film thickness, colour reference, quantity and destination port.

— Related products

Keep comparing.

All products →

Discuss your next steel coil order.

Send your product specification, quantity and destination port. SIMCO will review the sourcing options for your inquiry.